Do You Need A Permit For A Metal Building Installation?

Do You Need A Permit For A Metal Building Installation?

If you are starting any construction project, it is crucial to get a permit from your local authority before taking a shovel and starting to dig. Whether you choose a rent-to-own metal building or want to install a certified steel structure on your property, a permit is mandatory in most cases.

What Is A Permit For Construction?

Simply put, a permit is a document issued by the government that allows you to start a new construction project on your property.

The Purpose Of Permit

  • Ensure the construction is sound & fire-resistant.
  • Ensure the design adheres to the local codes & rules.
  • Ensure the safety of human occupants & neighboring buildings.

Do I Need A Permit For All Buildings?

In most cases, yes! You will need to secure a permit before starting installation. Some counties and cities allow small, non-occupant metal structures such as steel sheds or metal lean-tos to be permit-free. This is usually for structures smaller than 120 sq. ft. Note that this size can vary depending on the state.

For example, in California, you can install a metal structure smaller than 120 sq. ft. without a permit, whereas in Texas, the upper limit is up to 200 sq. ft.

Overview Of Codes & Regulations In States

Permit Need: In most cases, you will need a permit for construction. But, some storage sheds may be exempted. If you want to know whether your steel storage shed needs a permit, visit your city’s website.

Building Codes: These are a set of minimum standards that your metal structure design has to fulfill to get approved. These rules vary with location and climate zone.

HOA [if any]: Many locals have a House Owner Association, which sets restrictions on design, roof, style, and even color you can pick.

Energy Codes: Some areas have minimum energy standards that can impact your choice of insulation.

Factors That Influence Permit Fee For Construction Projects

Your final permit fee for a metal building depends on the following factors:

  • Construction type [residential, agricultural, commercial]
  • Steel building’s size
  • Location of installation
  • Inspection fee [complex projects that require inspection before & after permit can affect the overall cost.]
  • Application & review
  • Environmental impact

Types Of Permits Needed For Metal Building Installations

Building permit is the main document you will need to begin a new construction project. Apart from that, you may need an additional permit depending on the use of the metal building. Some of them are electrical, plumbing, HAVC system, foundation, occupancy, and zoning permit. Here is the average cost of them.

Cost Of Permit For Metal Building

For projects that cost up to $35,000, you can expect a permit fee of $450, and for bigger projects, this fee can be $3500 or more.

Type of Metal Building Project Average Cost
One car metal garage : $200 to $550
Two car metal garage : $200 to $1500
Projects that cost less than $25k : $30 to $250
Projects that cost between $25k to $50k : $200 to $650
Projects that cost between $50k to $100k : $400 to $1000

Additional Permit Cost

Electrical Permit : $50 to $400
Plumbing Permit : $30 to $550
HAVC Permit : $30 to $550
Metal Shed Permit [if any] : $50 to $250
HAVC : $50 onwards
Fence : $30 to $200
Deck : $50 to $600
Land Leveling/ Grading : $50 to $400

How To Get A Permit For Metal Building Project?

The process of getting permit applications in the US for your new metal building construction is simple. Just follow these steps.

Step 1. Local Rules

Check local requirements and zoning regulations before choosing the steel garage’s design. This may include setback rules, height restrictions, size limitations for additional dwelling units, roof style & slope, engineer-certified steel building, etc.

Step 2. Filling Form

You can fill out the form online or visit the local municipal office for an offline application. The form includes your personal details, property size, the size of the new structure along with existing ones, and a one-time permit fee.

Step 3. Submit Metal Building Plan

Along with the form, you have to provide a detailed engineering drawing and other plans associated with it.

Step 4. Review Process

Your application will undergo a review process to check if the design and size comply with local rules and zoning regulations.

Step 5. Revise Plan

Based on suggestions and recommendations from the local authority, review and revise your design if asked for. This will ensure safety and better resale value for your property. So, revise and resubmit the application.

Step 6. Permit Approval

Once all formalities are done, you will receive the permit for construction. Now, you can go ahead and order your metal building design.

Tip: Work closely with reputed builders who provide certified designs that adhere to the installation location.

How Much Time Does It Take To Secure A Permit For Metal Building?

The entire process can take 4 to 12 months to get a permit for an additional dwelling unit in the US. Simple projects can take a few weeks, whereas commercial metal buildings can take anywhere between 6 to 12 months.

Advantages Of Having a Permit Before Metal Building Installation

  • Having a secured permit ensures safety standards and compliance with all building codes.
  • It helps avoid legal issues in the future.
  • The permit comes with inspection at various stages of the construction. It ensures the process adheres to all codes during and after construction.
  • Having a secured permit provides better ROI when selling your property.
  • It aids insurance claims & eases getting premiums.

Do I Need A Permit Before Metal Building Construction For A Residential Project?

The short answer is yes! You do need a permit unless otherwise stated. For small metal tool sheds, you may not need a permit, but we suggest taking a look at your city/ county’s website before installing one.

Consequence Of Not Having A Permit

  • It may lead to a fine. The initial fine is about $300, but if you fail to address the issues further, you may end up paying over $2000. So, securing a permit is a smart move.
  • You may have to stop all the work, which can cause construction delays.
  • You may end up paying an extra fee to rectify any code violation.
  • It might get difficult to claim for insurance.
  • It will get hard to convince a potential buyer during resale.
  • Worst Case: You may be asked to demolish the entire building.

Simplify Your Installation Process With Carports Advisor

We understand going through all the rules can be a tedious task. If your local authority gives you some suggestions or asks to revise your design, you may need to redraw the metal garage’s design. Hence, always secure your permit before ordering your metal building. Carports Advisor’s expert team is familiar with most local codes, so they can suggest a design that suits your location, purpose, & budget. Call (336)-914-1654 for a free quote from us today!

Call us now and let one of our metal building consultants help you to design the building of your dreams at an competitive price.

home (336)-914-1654